Prices are in US Dollars

Made to Order

The Video is of a 3rd Gen Firebird. It is meant to be a general installation guide.

NOTE** Please ensure you select the version that fits your vehicle, tail light style, and tail light harness

This system fits (1998-2002 Firebird)

• Please use LEDs with this kit. (Please note that some LEDs are not compatible with this system. As it is difficult to determine which LEDs are compatible, I have designed my own compatible LEDs. I only have 1157, 1156, and 194 style bulbs, at this time.

Required Items:

• Electronic Signal Light Flasher (x1)   (*Note* The Factory Hazard Light Flasher is already Electronic)

Compatible Items (Please Click Links):

• Electronic Signal Light Flasher
• Troubleshooting

Features:

• Plug and play harness
• Sequential turn signals
• Brake lights sequence one time and then remain illuminated, until the brake pedal is released
• Sequential hazard lights
• Show Off Mode (See Video)
• Alternate turn signal mode selection (See Video)

Notes:

• The factory signal light flasher will need to be upgraded to an electronic signal light flasher, to accommodate the electronics in the module (I sell an adjustable, electronic signal light flasher).
• Factory incandescent bulbs will work just fine, but I recommend upgrading to LEDs. (Please note that some LEDs are not compatible with this system. As it is difficult to determine which LEDs are compatible, I have designed my own compatible LEDs. You can find them listed in the store).

Installation:

• Locate and remove the existing signal light relay (engage the turn signal (Not Hazard Lights) and follow the ticking sound).
• Replace the original signal light relay with an electronic style (LED Compatible). BraveTECH electronic signal light relays are available for purchase.
• Remove tail lights.
• Remove the Four 3157 style bulbs that are used for brake lights and turn signals, Remove the Two 194 style bulbs that are used as the outer running lights.
• Install the 3157 style adapters into the correct factory pigtails. The adapters will be labeled (Passenger side turn signal pigtail, Drivers side turn signal pigtail).
• Install the desired bulbs into the new pigtails that are provided with the sequential harness.
• Carefully re-install the tail lights and tuck the wiring into a safe location, where it will not be damaged.